Slab Leaks In Manteca, CA

The first thing to do if you suspect you have a water leak is to check your water bill. If your water bill spikes, it may be a clue there is an issue with a leak somewhere. The next step – and one of the easiest ways to check for a leak – is to examine all the fixtures in your home. This includes underneath cabinets, in the bathroom, the laundry room, kitchen sink, water heaters, etc.

To check and see if your toilet is running, buy some dye tablets at the hardware store. Drop one in the tank of your toilet and wait about ten minutes. If the dye enters the bowl of the toilet, you may have a leaking flapper in the tank.

You can purchase a pressure gauge at the hardware store and test the overall pressure of your home’s water supply. Make sure no one is using any water supply in your house, then go outside and attach the gauge to the main spigot. Let the water reach its normal pressure. Turn the water off completely and wait for ten minutes. If the pressure moves from its “normal” place, you may have a leak.

Finally, you can check your water meter for signs of a leak. Typically, your meter is located near your property line. Make sure no one is using any water fixtures in the house, then mark the needle on the meter outside. If the needle continues to run, you may have another type of leak in your home.

The only moldy thing in your home should be the cheese in your fridge! When leaks go untreated, they can lead to mold growth. To find the source, follow your nose and look where the scent is the strongest.

If there is a sudden warm or wet spot on the rug, you may have a leaking pipe. Left unattended, these types of leaks could cause structural damage.